Chapter 3
Serial Configuration
3-12
MS-610 Scanner User’s Manual
3–Ser
ial
Conf
ig.
User Outputs Commands
Beeper
Format:
<
Ku
beeper status,beeper volume,beeper speed>
Example:
To set the beeper for On Noread and set the beeper volume to
Level 1, enter
<Ku2,0>
.
New Master Pin
Format:
<
KN
status>
Example:
To enable New Master Pin, enter
<KN1>
.
Laser On/Off
Format:
<
KC
status>
Example:
To enable Laser On/Off, enter
<KC1>
.
Clock Speed
Format:
<
Kz
status>
Example:
To change Clock Speed to Fast, enter
<Kz1>
.
beeper status:
0 = Disabled
1 = On Good
2 = On Noread
beeper volume:
0 = Level 1
1 = Level 2
2 = Level 3
3 = Level 4
4 = Level 5
beeper speed:
0 = Fast
1 = Slow
status:
0 = Disabled
1 = Enabled
status:
0 = Disabled
1 = Enabled
status:
0 = Sow
1 = Fast
