User Outputs Menu
MS-610 Scanner User’s Manual
2-29
2–Menu C
on
fig.
Relay Polarity
Default:
Positive
Options: Positive, Negative
Allows you to choose between positive and negative output signals at pin 7.
Relay Pulse Width (in 10 ms incs)
Default:
5 (.05 seconds). Corresponds to 50 ms displayed in the menu.
Options: 0 to 255 (0 to 2.55 seconds). Divide the number entered on the
command line by 100 for time in seconds.
Allows you to set the duration of the good match/noread output signals at
pin 7.
Command Start Character
Default:
<
Options: Any ASCII character
Allows you to define a new ASCII start character in a serial command.
