8.9.1. Telemetry reports / Report settings
•
“Telemetry parameters”
– this group of fields defines settings of PARM, UNIT,
EQNS, and BITS parameter packets which describe the telemetry data sent by the
device,
•
“Dest”
– destination field of a telemetry parameters packet.
•
“Path”
– APRS path (default value of WIDE2-2 will allow your device to be
digipeated by most nearby digipeaters), if you leave this field empty,
packet will be sent without path,
•
“RF[min]“
– telemetry parameters packet transmit rate to RF (expressed in
minutes), packet will not be sent if this field is set to 0,
•
“IS[min]“
– telemetry parameters packet transmit rate to APRS-IS
(expressed in minutes), packet will not be sent if this field is set to 0,
•
“Telemetry data”
– this group of fields defines settings telemetry data reports,
•
“Dest”
– destination field of a telemetry data packet.
•
“Path”
– APRS path (default value of WIDE2-2 will allow your device to be
digipeated by most nearby digipeaters), if you leave this field empty,
packet will be sent without path,
•
“RF[min]“
– telemetry data packet transmit rate to RF (expressed in
minutes), packet will not be sent if this field is set to 0,
•
“IS[min]“
– telemetry data packet transmit rate to APRS-IS (expressed in
minutes), packet will not be sent if this field is set to 0,
•
“Telemetry project title”
- this is a project name associated with the telemetry
station, sent in BITS message,
•
“First telemetry data packet delay [min]” - delay for the first telemetry data
packet, it allows to gather data (especially for 10-min and 60-min report) after
device power-up.
•
“Telemetry reports”
- if disabled, no telemetry parameters or telemetry data
20