7. Connecting to PC
Configuration of APRS Voyager can be done via USB interface with APRS Voyager
Configurator software.
APRS Voyager enters into configuration mode only when USB cable is detected while
powering up and it is indicated by Red LED blinking.
To connect to your computer, follow these steps:
•
Disconnect APRS Voyager DB-9 cable, device should be unpowered,
•
Connect the USB cable from your computer to APRS Voyager, Red LED should start
to blink (device is now powered from USB),
•
Now you can use APRS Voyager Configurator for device configuration read/write
or firmware update.
APRS Voyager device appears as USB-HID device in Windows operating system, and
should be detected automatically. Therefore you don't need to install any device drivers
for APRS Voyager.
11