Spider SAS is recognized by the BTLE interface as {MicroPort Sensor BLE 05}. Click on the
icon (framed in purple above) to pair Spider SAS with the computer. If a password is required
type "0" or "000000".
Spider SAS paired successfully with the computer. Pairing can be checked with Device
Manager (see below).
The Bluetooth key must be installed according to the instructions of the manufacturer of BTLE
interface (see left). To check the BTLE adapter was correctly installed, on the desktop, right
click on the icon {My computer} then select consecutively {Properties}
⇨
{Hardware}
⇨
{Device
manager
❶
} the BTLE adapter should be displayed
❷
.
NATIVE BLUETOOTH INTERFACE
This interface is generally used for laptops equipped with BTLE embedded chipset.
NOTE:
The pairing operation is similar to BTLE Belkin interface. Spider SAS must be
switched on in order to pair successfully.
9.3.
9. HOW TO PAIR SPIDER SAS (WINDOWS)
SPIDER SAS – PHYSIO HUB – HOOKUP RS – U908F
31
