29
When the input Codechip number
of the test strip has expired, the
system will deliver a warning
message indicating that the
Codechip has expired.
8.6 Heating
After the test strip is inserted and its
Codechip is installed, the instrument
will enter the heating state, and
the screen will display the heating
progress (Figure 3-6).
8.7 Add sample
The system will count down and
prompt the user to add sample
(Figure 3-7) upon the completion
of heating, and the sample must
be added within 10 minutes. Do
not move the instrument or your
fingers during sample adding. If the
sample is not added properly within
10 minutes, the system will deliver
an error message indicating sample
adding is timeout.
3-6
3-7