Microplex PP 404, User Manual

Page: 93 / 248

6-1
6. Technical Data
The following technical data refers to the Personality Module PM SER/PAR/USB.
Fanfold Printer Multi-purpose Printer
Print Head
Technology Serial Impact Dot Matrix SIDM Technology
Paper Path Flatbed technology
Print Head 24 needles, needle diameter 0.25 mm (0.01 inch), lifetime
Approximately 350,000 pages
(standard DIN letter).
Fonts Data, Roman, San Serif, Courier, Prestige, Script, OCR B, OCR
A, Orator-C, Orator, DATA LARGE; all fonts (except Data and
DATA LARGE) in Letter Quality (LQ) and Near Letter Quality
(NLQ).
OCR A, OCR B only in LQ.
Character
Attributes
Bold, shadow, italic, underline, double underline, over line,
strike through, sub/superscript, condensed; double, triple,
quadruple up to eightfold height and width; DATA LARGE up
to 999-fold size.
Character Pitch Standard character pitches are: 10, 12, 15, 17.1, 18, 20 cpi
and proportional. In addition, commands are defined to
select non-standard character pitches. It is also possible to
print overlapped characters. Fonts will be compressed if
smaller pitches are selected.
Line Spacing 2, 3, 4, 6, 8, 12 n/360 lpi
Macros Up to four printer configurations selectable via
Operator Panel or Software.