NAVEL 2.0 USER GUIDE
(Installation by qualified personnel)
QG_T009_ENG_REV_1.0
MICRONOVA SRL
Pag.
1
of
2
1.
CONTENT OF THE BOX
•
Navel 2.0 (
fig. 1-1
);
•
MODU II-MODU II serial cable (
fig. 1-2
);
•
MODU II-DSUB 9 serial cable (
fig. 1-3
);
•
Power supply* (
fig. 1-4
);
•
velcro.
*
The support power supply supplied in
the kit complies with the EN 60950-1
directive,
and
has
the
following
characteristics:
•
SELV (very low safety voltage);
•
Protected against short circuits and
overcurrents;
•
Limited power source (Low power source
LPS)
2.
NAVEL POWER SUPPLY
1.
Depending on the type of stove, connect one of the two appropriate serial cables. (
fig. 1-2, 1-3
)
2.
Supply the Navel (
fig. 1-1
) with the support power supply (
fig. 1-4
). The device is powered if the green
Power LED (2) is on. (For more details on the operation of the LEDs, refer to the relevant section 7:
”
MEANING OF ICONS
”
)
3.
USER REGISTRATION PROCEDURE
1.
Download and install the
“
Nina
”
app from Google Play or Apple Store.
2.
Open the application and proceed with registration (written "
Subscribe
") by entering the
following:
-
email address;
-
dedicated password for the application (minimum 8 characters);
-
password verification copy;
-
consent to privacy.
3.
Press the "SUBSCRIBE" button and wait for the e-mail containing the 6-digit code useful for
activating the account.
4.
Enter the 6-digit code received by e-mail and press the "ACTIVATE" button to access the
application.
4.
STOVE REGISTRATION PROCEDURE
1.
Open the stoves management application and enter the login / authentication data to perform the
“Login”.
2.
From the "My Stoves" screen, press the "+" button at the bottom right to add a stove.
3.
Scroll to the configuration wizard screen and press the "ENTER DATA" button.
4.
Insert the required data progressively:
-
Serial number of the stove (shown on the back of the stove on a silver label) using the "barcode
capture" function;
-
MAC address (shown on the label supplied with the Navel user manual) using the "QRcode" capture
function;
-
Registration Code (Reg. Code) (shown on the label supplied with the Navel user manual);
-
Stove location data (optional data);
-
Authorization to share stove operating data;
-
Press the
“S
AVE STOVE
”
button.
