Power Screen
The Power Screen controls the power management functions or the “Green
Section” of the system. To move to the Advanced Screen, use the left and
right arrow keys <
←/→
> keys until you see the screen below (Figure 4-9) .
Figure 4-9 Power Screen
APM
When enabled the power management features are active. The default setting
is Disabled. If you enable this category, you must also set the other power
management options below.
Power Management Mode
This category may be set for Maximum Power Savings, Medium Power
Savings, Minimum Power Savings, Customized, or Disabled (default). If you
set this category for Maximum, Medium, or Minimum power savings, you do
not need to make any more adjustments. If you select Customized, you must
set the following five categories.
Standby Timeout
The Standby Timeout category sets the amount of time that elapses for the
system to enter the power saving mode. The options are Disabled (default), 1
4-14
Micronics M4Pi System Board Manual
