3
Installing the M4Pe, System
Memory, CPUs and Peripherals
This section explains how to install the M4Pe system board, SIMMs,
CPUs, and peripherals.
Warning:
Before installing or removing any peripherals or components, make
sure you have a clear work space and that you adhere to all anti-
static precautions (see page 2-1). Micronics recommends only
trained technicians operate on the system board. Damage which
occurs to the board while adding or removing peripherals or compo-
nents may void the warranty.
If problems arise while installing peripherals, contact the computer
outlet where you purchased the peripheral or Micronics’ Technical
Support Department.
3-1
