MicroNet SP5102, User Manual, Page: 98 / 104

97
6.17 [phone] command
1. -print:
Print current call progress tone configurations (ring: ring
tone, rbt: ring back tone, bt: busy tone, dt: dial tone). This
parameter should be accompanied with tone type.
2. -ring:
To set RING tone value. The played tone type, when
Phone ha incoming call.
3. -rbt:
To set Ring Back Tone value. The played tone type, when
Phone dials out a call.
4. -bt:
To set Busy Tone value. The played tone type, when Phone
dials to a destination that is busy.
5. -dt:
To set Dial Tone value. The played tone type, when hook off
the Phone.