manualshive.com logo in svg

MicroNet SP5102, User Manual, Page: 58 / 104

Share
Download
MicroNet SP5102 User Manual Download Page 58

 

 

 

 

 

57

(c) 

PPPoE:

 If user selects PPPoE mode, following items will be 

displayed. 

-

  DNS Server Obtained Mode: 

When SIP Phone is in DHCP or 

PPPoE mode, user can determine DNS address is obtained from 
server or set manually. 

-

  Primary DNS Server: 

If user determines to set DNS address 

manually, please set Primary Domain Name Server IP address 
here.  

-

  Secondary DNS Server: 

If user determines to set DNS address 

manually, please set Secondary Domain Name Server IP 
address here. 

-

  PPPoE User ID:

 Set PPPoE authentication User Name. 

-

  PPPoE User Password:

 Set PPPoE authentication password. 

-

 PPPoE 

Retry:

 Enable/Disable auto-retry function after PPPoE 

disconnection. If user enables this function, after PPPoE being 
disconnected, SIP Phone will automatically reboot to re-connect, 
and after reboot, if SIP Phone still can’t get contact with server, 
SIP Phone will keep trying to connect. After re-connected, SIP 
Phone will also restart system. On the other hand, if user 
disables this function, SIP Phone won’t reboot and keep trying to 
connect. 

-

  Send PPPoE Echo Request

: Enable or Disable PPPoE Echo 

function. If user enabled this feature, SIP Phone will send out 
echo request to check PPPoE connection status. Please notice 
that if user disables this function, SIP Phone cannot detect if 
PPPoE connection is still alive or not. 

-

  HTTP Port for WEB Management:

 Set port number for user to 

configure SIP Phone via WEB management. Default value is 80. 

 

 

Summary of Contents for SP5102









































































































Reviews:

No comments