Rev. 6.2
Micronet SmarTab 8 – Hardware Guide
36 / 61
USB Communication
USB HOST
The enhanced cradle is a USB HOST. Note, however, that the USB lines are part of the Standard Cradle Dev
Cable. The USB Host interface supports the following profiles:
•
USB Standard HID
•
USB Printer (PCL)
•
USB Storage USB CLIENT
The USB Client interface supports Android ADB for application development and device management.
The USB Client port provides Android’s ADB connectivity and supports:
•
Device configuration
•
Management tools
•
Application development
•
Debugging caution
There are two ways to use the USB Client:
•
Through the Micronet SmarTab 8 USB TYPE-C connector on the left panel.
•
Through the Micronet SmarTab 8 cradle USB Client cable while the tablet is docked.
General Purpose I/O
Analog and Digital Input lines
The SmarTab 8 tablet provides seven automotive input lines (0-32V) through its enhanced cradle. The
input lines can be read as digital (state 0 or 1) or analog (voltage level) lines. Note, however, that the
automotive input 1/output 1 line is a part of the Standard Cradle Dev Cable.
Digital inputs
IGN (automotive voltage state) is for monitoring the ignition switch signal. The other seven input lines can
be used for any purpose, like sensing door opening, sensing bus amber lights, etc.
Note:
OS Burn using Fastboo t only works through the USB TYPE - C plug – not the cradle.