Micron Xccela Flash User Manual Download Page 1

 

 

 

 

 

Micron

®

 Xccela

 Flash

 

User Guide for ZedBoard

 

 

This development kit (including daughterboard with FPGA software code) contains confidential information of Micron 

Technology, Inc.  It is provided for evaluation purposes only and is not authorized or licensed for any other use.  This 

development kit is provided “as is” without any warranties of any kind whatsoever.  By your acceptance and use of 

this development kit, you acknowledge, agree, and accept that Micron expressly disclaims all warranties, whether 

written or implied by law, including warranties as to title, merchantability or fitness for a particular purpose, warranties 

against infringement of intellectual property rights of a third party, warranties arising by custom, trade usage, course 

of dealing, or otherwise.  Micron makes no warranty of any kind, and hereby disclaims any warranty, that the 

development kit will meet your or any other person’s requirements, achieve any intended result, or be secure, 

accurate, complete, free of harmful code or error free.  Any open source components or other third-party materials 

are provided “as is” and without any representation or warranty from Micron. 

 

 

Micron

®

 Xccela™ Flash (MT35X)  

Development Kit 

User Guide for ZedBoard

  

 

Summary of Contents for Xccela Flash





















Reviews: