Altronics Pty. Ltd. Sydney Melbourne Perth Brisbane Adelaide
www.altronics.com.au
Replacing Filter
2.
4.
Care & Maintenance Notice
• Before use, always check the barrel locking nut is hand-tightened to ensure the tip is firmly held
in position.
• Regularly remove the barrel and tip to keep it clean and clear of debris. This should be done at
least once a week.
• The element is of ceramic composition which is sensitive to sharp or strong impact. Do not drop
it, or ‘tap’ the soldering iron in an effort to clean it. Cleaning should always be performed with a
damp sponge while the tip is hot.
Failure to Comply Will Void Warranty
7
