background image

                                                                                                       Fiber Fabry-Perot Tunable Filter |

 FFP-TF2

 

C o p y r i g h t  

©  

2 0 0 9   M i c r o n   O p t i c s ,   I n c .  

 

 

              F i r s t   T i m e   U s e r   M a n u a l                        

2

 

 

 
 
Congratulations on the purchase of your Micron Optics tunable filter.  Our patented, 
high performance filter incorporates the highest optical and mechanical resolution 
available while maintaining the most reliable all-fiber platform.  
 
This document was prepared for first-time users of the FFP-TF2.  Additional critical 
information can be found online at www.micronoptics.com. 
  
As a first time user, you should find this handbook valuable in helping you get the 
most out of your filter as soon as possible.  System designers requiring a more in-
depth understanding of filter operation and characteristics may find our 

FFP-TF2 

Technical Reference

 helpful. This document is also available online at our website. 

 
All of us at Micron Optics thank you for purchasing our products.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for FFP-TF2










Reviews: