Q
UICK
S
TART
Analyze Functions on page 3 - 44
Alt + 9
QuickStart
performs a series of analyses using the same
Setup
number. Like the
Analyze
function, the prompts shown with
QuickStart
are based on the
Setup
parameters specified for the
Setup
number used.
The parameters for the last
Set Up
group used will be applied to the
QuickStart
ana-
lyses.
The information displayed on the third and fourth lines of this prompt and subsequent prompts
depends on the parameters specified for the
Set Up
group.
Press
ENTER
to advance through the prompts, entering information as requested until this
prompt is displayed:
Press
ENTER
to start the analysis.
QuickStart
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
3 - 47
