2 Operational Procedures
S
TART
A
NALYSIS
System Options on page 3 - 38
Analyze Functions on page 3 - 44
Alt + 4
Press
CHOICE
to display the options. Press
ENTER
to select.
The following steps describe how to start an analysis responding to the prompts that appear if all
the prompts have been selected to display. To disable any of the prompts before every analysis,
make the change in
System Options
.
To start an analysis using the default analysis parameters:
1. At
Select Setup
, enter the
Set Up
group to use for the current analysis (by default, the num-
ber for the previous analysis is displayed).
2. Enter a
Sample ID
(up to 20 numbers and dashes). Using sample IDs helps to keep track of
data from various analyses.
3. Enter the sample mass from
0.0001
to
999.9999 g.
2 - 14
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
