S
YSTEM
L
EAK
T
EST
Guidelines for Connecting Gases on page 5 - 6
This test checks for atmospheric leaks among instrument components and typically is performed
only when requested by a service representative. Sample tubes or plugs must be installed on the
sample and balance ports prior to performing this test.
A series of prompts displays each time
ENTER
is pressed. Some prompts may request a task to
be performed. Always perform the task before pressing
ENTER.
n
Informative prompt
. Indicates how long a test will take or how long before a valve should be
opened or closed. Read the message, then press
ENTER
.
n
Operator Action prompt
. Instructs the operator to perform an action. Perform the action, then
press
ENTER
.
System Leak Test
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
4 - 7
