Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 38 / 426

Specifying Sample Defaults Gemini VII
3-2 239-42828-01 - Dec 2012
Advanced Format
The values specified in the parameter portions of the default sample file (Degas Conditions, Analysis
Conditions, Adsorptive Properties, and Report Options) are saved as the defaults for new sample files.
To navigate from one set of parameters to another, click the parameter tab at the top of the window.
Perform the following steps to establish defaults for a sample information file in the Advanced format.
1. Go to
Options > Sample Defaults
.
2. In the
Sequence Number
alpha/numeric text box, specify a default file name string. The
Sequence Number
field must contain a minimum of three (3) numbers. This number is
incrementally sequenced and displays in the
File name
text box in the
File > Open > Sample
Information
window.
3. The text box to the right of the
Sample
field, is used to enter a format for the sample
identification. Include the
$
symbol to automatically include the
Sequence Number
field text as
part of the sample identification.