Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 174 / 426

Start Po Measurement Gemini VII
6-6 239-42828-01 - Dec 2012
Start Po Measurement
Use to measure the saturation pressure.
The window closes at the end of the measurement. The value obtained is stored and recorded on the
Unit Configuration window as the most recently measured Po and is available for subsequent sample
analyses. The Po option is selected from the Analysis Conditions tab by clicking the
Po and T
button.
Analyzer Model Description
Model 2390a Measure the Po only in the
Sample tube
. Ensure a sample tube with no
filler rod is attached to the sample port then click
Start
to begin the
measurement.
Models 2390p and
2390t A Po tube is installed on the Model 2390
p
and 2390
t
. Measure the Po in
the
Po tube
or in the
Sample tube
. Ensure a sample tube with no filler rod
is attached to the sample port, then click
Start
to begin the measurement.
Not displayed for
Model 2390
a