Micromeritics ASAP 2460, Operator'S Manual

Page: 390 / 468

Appendix F ASAP 2460 Operator’s Manual
F-10 246-42800-01 - Aug 2013
Model isotherms were calculated using the prescriptions of Tarazona for density dependent weighting
functions and a cylindrical pore geometry. The wall potential used is k = 30 K, typical for a silica or
alumina surface.
This model file is particularly useful for sizing zeolites or zeolite containing materials that have sub-
stantial micropore volume. The reported pore size range is 3.8 to 387 Å.
N2 - Carbon Slit Pores by NLDFT

Ar - Carbon Slit Pores by NLDFT
Model isotherms were calculated using the prescriptions of Tarazona for density dependent weighting
functions and a slit-like pore geometry. These models are slightly different from N2-DFT and Ar-DFT
models that were calculated using NLDFT with density independent weighting functions.
The reported pore size range is from 3.5 to 1000 Å.
N2 - Carbon Finite Pores, As=6, 2D-NLDFT

Ar - Carbon Finite Pores, As=6, 2D-NLDFT
Substrate
Oxide
Category:
Porosity
Method:
Nitrogen at 77 K
Reference
: P. Tarazona, Phys. Rev. A 31: 2672 (1985).

Idem, Phys. Rev. A 32: 3148 (1985).

P. Tarazona, U. M. B. Marconi, and R. Evans, Mol. Phys. 60: 573 (1987).
Geometry
Slit
Substrate
Carbon
Category:
Porosity
Method:
Nitrogen at 77 K; Argon at 87 K
Reference
: P. Tarazona, Phys. Rev. A 31: 2672 (1985).

Idem, Phys. Rev. A 32: 3148 (1985).

P. Tarazona, U. M. B. Marconi, and R. Evans, Mol. Phys. 60: 573 (1987).
Geometry
Finite Slit
Substrate
Carbon
Category:
Porosity
Method:
Nitrogen at 77 K; Argon at 87 K