Micromeritics ASAP 2460, Operator'S Manual

Page: 180 / 468

Start Micropore Analysis ASAP 2460 Operator’s Manual
4-14 246-42800-01 - Aug 2013
Enable Manual Control
Unit [n] > Enable Manual Control
Use to enable the manual control of certain system valves and elevator components. When this option
is enabled, a checkmark appears to the left of the menu item.
If the analysis schematic is not displayed, select
Unit > Show Analysis Schematic
, then select
Enable
Manual Control
.
When manual control is enabled, the valve symbols change color on the computer screen to indicate
their status.
Use the mouse pointer to select a component. A component is selected when it is surrounded by a thin
line. Each component has a shortcut menu displaying the operations available for that particular com-
ponent. These menus may be accessed by right-clicking on the desired component.
You can open and close valves, and raise or lower the elevator by using one of the following methods:
• Right-click on the valve or elevator symbol to access the shortcut menu and select the appropriate
action.
Servo valve
1000-mmHg transducers
Sample tube
Elevator
Po tube
Gas inlet valves
Status window
1000-mmHg transducer
10-mmHg transducer
Vacuum gauge
1-mmHg transducer
Analysis manifold temperature
1000-mmHg transducers
Analysis ports
p
o
port
Green = open
Yellow = closed