Micromeritics AccuPyc 2 1340, Operator'S Manual

Page: 64 / 158

System Commands AccuPyc II 1340
3-30 Aug 2013
Review
The Review function enables you to review results of the last operation (analysis or calibration).
Analysis
Press Alt + 5 to review or edit analysis results; the following prompts display if requested. You may
edit the information in the prompts if desired; for example, you may wish to edit the sample mass
when density determinations are requested.
Displays the identification entered for the analysis.
Press
ENTER
.
Displays the sample mass you entered for the analysis (if
Density was chosen as Analysis display mode).
Press ENTER .
Displays the sample chamber temperature.
Press
ENTER
.
Displays the time and date the analysis began.
Press
ENTER
.
Displays the time and date the analysis completed.
Press
ENTER
.
Unit[n] SN1234 10 cm3
X - X - X
Sample ID:
(sample identification)
Unit[n] SN1234 10 cm3
X - X - X
Sample Mass:
(mass)
Unit[n] SN1234 10 cm3
X - X - X
Temperature:
(sample chamber temperature)
Unit[n] SN1234 10 cm3
X - X - X
Start:
(HH:MM:SS) (DD/MM/YY)
Unit[n] SN1234 10 cm3
X - X - X
End:
(HH:MM:SS) (DD/MM/YY)