27
6.0
Indicators and Controls
6.1
Zone Controller LEDs and Controls (Ancillary for ULC)
Figure 30 Zone Controller LEDs and Controls
6.1.1 Buttons
Reset (Password Protected): Press Reset to
•
reset all Latching, Trouble Conditions.
•
turn OFF Signal Silence.
•
stop and reset all Timers.
•
process inputs as new events.
The Zone Controller will net reset until the Signal Silence Inhibit timer has expired.
Signal Silence (Password Protected): Pressing the Signal Silence button when the Zone
Controller is in Alarm turns on the Signal Silence LED and deactivates any Silenceable
Indicating Circuits. Non-Silenceable Circuits are unaffected. Signals will re-sound uon
any subsequent alarm.
This button does not function during the following:
•
Any configured Signal Silence Inhibit Timer period.
•
If Fire Drill has activated the Indicating Circuits.
Enter, Menu, Cancel, Info:
Use these buttons to navigate the menu on the LCD display.
Signal Silence
LED
Alarm
LED
LCD Display
Trouble
LED
Supervisory
LED
AC
LED
Menu
Cancel
Info
Enter
Summary of Contents for Fire-Link 3
Page 2: ......
