24
Wiring
Figure 26 MIX-M500RAP(A) Advanced Protocol Addressable Relay Control Module
Wiring Detail
Figure 27 MIX-M500MAP(A) Advanced Protocol Addressable Monitor Module Wiring
Detail
5.5
Mircom and Secutron FACP SLC Loop Wiring to Zone
Controllers
When connecting a Mircom or Secutron FACP SLC loop to the zone controller, there is no
need for any relay and monitor modules. Wire the SLC loop from the Mircom FACP to each
addressable loop connector on the Zone Controller in a daisy chain fashion. Refer to Figure
28. For Class X (or Style 7) wiring refer to Figure 29.
-
+ SLC Loop
-
+
Input 2, 3, 4
-
+
To next device
NO
C
Output 1, 2, 3, 4
-
+ SLC Loop
-
+
To next device
47 kΩ EOL
Use UL listed EOL resistors
Summary of Contents for Fire-Link 3
Page 2: ......
