7
Microlife BP W10
EN
The higher value is the one that determines the evaluation. Example:
a blood pressure value of
140/80
mmHg or a value of
130/90
mmHg
indicates «blood pressure too high».
5. Appearance of the irregular heartbeat (IHB) symbol
This symbol
9
indicates that an irregular heartbeat was detected. In
this case, the measured blood pressure may deviate from your actual
blood pressure values. It is recommended to repeat the measure
-
ment.
6. Data memory
This device automatically stores the last 30 measurement values.
Viewing the stored values
Press the M-button
3
briefly, when the device is switched off. The
display first shows
«M»
AP
, and
«A»
which stands for the average of
all stored values.
Pressing the M-button again displays the previous value. Pressing
the M-button repeatedly enables you to move from one stored value
to another.
Blood pressure readings with suboptimal cuff fit
AR
-A are not
considered in the average value.
Pay attention that the maximum memory capacity of 30
memories is not exceeded.
When the 30 memory is full, the
oldest value is automatically overwritten with the 31
value.
Values should be evaluated by a doctor before the
memory capacity is reached – otherwise data will be lost.
Clearing all values
If you are sure that you want to permanently remove all stored
values, hold down the M-button (the device must have been switched
off beforehand) until
«CL»
appears and then release the button. To
permanently clear the memory, press the M-button while
«CL»
is
flashing.
Individual values cannot be cleared.
2 blood pressure
elevated
130 - 135 80 - 85
Self-check
3 blood pressure
optimum
<130
<80
Self-check
Information for the doctor in case of repeated appearance of
the IHB symbol:
This device is an oscillometric blood pressure monitor that also
measures the pulse during blood pressure measurement and indi
-
cates when the heart rate is irregular.
Range
Systolic Diastolic Recommendation
