MODELS: UT CT ST
Locker mode instructions
For Office furniture, storage cabinets, lockers, safes, vaults, secured enclosures
Page 1: ...MODELS UT CT ST Locker mode instructions For Office furniture storage cabinets lockers safes vaults secured enclosures ...
Page 2: ...ocated behind the Program button The Program button is slightly opaque so the key fob signal will penetrate the button Knob To move the lock mechanism 90 or 180 degrees clockwise or counterclockwise from the locked and unlocked states Multiple levels of access 1 Master code and or blue control key fob 2 User code and or black key fob Note The MicroIQ is pre programmed with a factory master code Th...
Page 3: ...SER CODE new user code turn knob to unlock Example 1234 turn knob to unlock Result User code 1234 was used to unlock the lock Note The user code created in locker mode is a one time code and is erased when the MicroIQ is unlocked P master code Example P 112233 Result Master code 112233 was used to unlock the MicroIQ Note If the knob is left in the unlocked position for more than 20 seconds the use...
Page 4: ...git the 2 4 must be used when accessing the lock because other combinations that equal six such as 1 5 are distinguished from 2 4 Switching Modes Note The master code is retained when switching modes 1 Unlock the MicroIQ and turn the knob to the unlocked position 2 Remove the battery for 10 seconds 3 While holding the program button P reinsert the battery and wait until all 3 LED s fade in and fad...
