microHAM SMORF, Manual

Page: 15 / 76

micro HAM © 2015 All rights reserved
3.
PK ATTACK
•
Sets attack time used for peak values (PK).
Range: 0 – 200ms, Step: 1ms.
4. PK DECAY
•
Sets decay time used for peak values (PK).
Range: 0 – 200ms, Step: 1ms.
5. PEAK HOLD
•
Turns ON/OFF peak hold function. When enabled, peak value is held on its position as one segment.
Higher peak value resets lower peak value.
6. HOLD TIME
•
Sets how long the peak segment will be lit on its position. Occurrence of higher peak value during the
hold will restart this time.
Range: 0 – 20s, Step: 100ms.
7. P-H DECAY
•
Sets decay time for peak-hold segment.
Range: 0 – 20s, Step: 100ms.
8. EDIT POWER COLOR TABLE
•
Defines four (4) custom power ranges and colors on per band basis.
Example:
BAND COLOR POWER COLOR POWER COLOR POWER COLOR
160m GRN 8W YEL 10W GRN 40W RED
10.
EDIT SWR COLOR TABLE
•
Defines four (4) custom SWR ranges and colors on per band basis.
Applicable to bottom bar graph only.
Example:
BAND COLOR POWER COLOR POWER COLOR POWER COLOR
160m GRN 1.50 YEL 2.00 RED 3.00 RED
15