MC40-SEF
Doc. N°
MO-0475-ING
Copyright 2012
FW: 1320.38.01.x
Date
06.09.2022
Rev.
1
Pag.
36
of
36
20. Electrical Characteristics
Approval: CE
Reference Standards IEC 60255 - CE Directive - EN/IEC61000 - IEEE C37
Dielectric test voltage
IEC 60255-5
2kV, 50/60Hz, 1 min.
Impulse test voltage
IEC 60255-5
5kV (c.m.), 2kV (d.m.)
–
1,2/50
s
Insulation resistance
> 100M
Environmental Std. Ref. (IEC 60068)
Operation ambient temperature
-10°C / +55°C
Storage temperature
-25°C / +70°C
Environmental testing
(Cold)
IEC60068-2-1
(Dry heat)
IEC60068-2-2
(Change of temperature)
IEC60068-2-14
(Damp heat, steady state) IEC60068-2-78 RH 93% Without Condensing AT 40°C
CE EMC Compatibility (EN61000-6-2 - EN61000-6-4 - EN50263)
Electromagnetic emission
EN55011/22
industrial environment
Radiated electromagnetic field immunity test
IEC61000-4-3 level 3
80-2000MHz
10V/m
ENV50204
900MHz/200Hz
10V/m
Conducted disturbances immunity test
IEC61000-4-6
level 3
0.15-80MHz
10V
Electrostatic discharge test
IEC61000-4-2
level 3
6kV contact / 8kV air
Power frequency magnetic test
IEC61000-4-8
1000A/m
50/60Hz
Pulse magnetic field
IEC61000-4-9
1000A/m, 8/20
s
Damped oscillatory magnetic field
IEC61000-4-10
100A/m, 0.1-1MHz
Immunity to conducted common mode disturbance
0Hz-150KHz
IEC61000-4-16 level 4
Electrical fast transient/burst
IEC61000-4-4
level 3
2kV, 5kHz
HF disturbance test with damped oscillatory wave
(1MHz burst test)
IEC60255-22-1 class 3
400pps, 2,5kV (m.c.), 1kV (d.m.)
Oscillatory waves (Ring waves)
IEC61000-4-12 level 4
4kV(c.m.), 2kV(d.m.)
Surge immunity test
IEC61000-4-5
level 4
2kV(c.m.), 1kV(d.m.)
Voltage interruptions
IEC60255-4-11
Resistance to vibration and shocks
IEC60255-21-1 - IEC60255-21-2 - 10-500Hz - 1g
Electric Rated Value
Accuracy at reference value of influencing factors
2% In
for measure
2% + to (to=20
30ms @ 2xIs)
for times
Rated Current
In = 1A/5A - On = 1A/5A
Current overload
400 A for 1 sec; 20A continuous
Burden on current inputs
0.1VA a In = 1A
Average power supply consumption
7 VA
Output relays
rating 6 A; Vn = 250 V
A.C. resistive switching = 1500VA (400V max)
make = 30 A (peak) 0,5 sec.
break = 0.3 A, 110 Vcc,
L/R = 40 ms (100.000 op.)
Communication Parameters
RS485 (Back)
9600/19200 bps
–
8,n,1 - 8,e,1 - 8,o,1
–
Modbus RTU or IEC60870-5-103
RS232 (Front)
9600/19200/38400/57600
–
8,n,1
–
Modbus RTU
This publication may be subject to alteration without prior notice. Therefore, a printed copy of this document may not be the latest revision. Please contact your local
representative for the latest update. The trademarks MS Microelettrica Scientifica, Knorr and Knorr-
Bremse as well as the figurative mark “K” are registered. Copyright
© Knorr-Bremse AG and Microelettrica Scientifica SpA - all rights reserved, including industrial property rights application. Knorr-Bremse AG and Microelettrica
Scientifica SpA retain any power of disposal, such as for copying and transferring.
20090 Buccinasco (MI) · Via Lucania 2 · Italy · Tel.: +39 02 575731
E-Mail: [email protected] · www.microelettrica.com
