IMPORTANT -‐ TO ENSURE CORRECT OPERATION OF YOUR
B1ME/HT
THERMOSTAT PLEASE READ THE GUIDE BEFORE COMMENCING INSTALLATION
B1ME/HT
Thermostat
User Guide
A vivarium should be set up to allow a temperature gradient. The
heater should be at one end with the sensor in the centre of the
vivarium. This will allow a Hot area, Controlled area and a Cold area.
Correct temperature reading
The temperature sensor encased in the black sheath is very
accurate. Having set the desired temperature on the thermostat and
positioned the sensor in its required location the temperature of the
air will be controlled accurately at the position of the temperature
sensor.
The temperature nearer the heater (from the sensor position) will
be hotter and further away from the heater it will be cooler.
Please note that when using a thermometer to check the
temperature unless it is in exactly the same position as the
thermostat sensor there will be a discrepancy due to the positioning
of the thermometer.
Warranty
Used in accordance with these instructions this thermostat will give many years of trouble
free service. The thermostat is guaranteed for five years from the date of purchase against
faulty parts and workmanship. In the unlikely event of a failure, return it to Microclimate
International Ltd together with a receipt or proof of purchase and a brief description of the
fault. If returned within one year there will be no charge, after this time a charge of £5 will
be made for administration and postage. Please enclose a cheque or postal order made
payable to Microclimate International. Cash is also accepted.
No liability is accepted other than for the repair or replacement of a faulty product.
This does not affect your statutory rights.
Microclimate International
Unit 3 Heath Mill Enterprise Park
Heath Mill Road
Wombourne
England
United Kingdom
WV5 8AP
Tel : 01902 895351
Fax : 01902 897613
[email protected]
www.microclimate.co.uk
B1ME/HT
Thermostat
The
B1ME/HT
Thermostat is designed to give precise microprocessor
controlled temperature of heat sources up to 600 watts. This may
include heatmats,ceramics, bulbs and other heat sources. The heat
source must be a minimum of 5 watts.
The
B1ME/HT
is a dimming thermostat which will control the heat
source precisely by varying the power to the heater. The thermostat has
a built in day/night sensor which allows a temperature drop during the
night to recreate a realistic microclimate for your pet.
WARNING
DO NOT OVERLOAD YOUR THERMOSTAT BY CONNECTING
HEAT SOURCES WITH OUTPUTS GREATER THAN 600 WATTS.
DAMAGE CAUSED BY MISUSE IS NOT COVERED BY THE WARRANTY.
Heater
Sensor
Hotter
Controlled
Cooler
PF0078HT A