PLECS Model Quick Start Guide for Vienna PFC
DS50002997A-page 24
2020 Microchip Technology Inc.
FIGURE 7-2:
A Multi-Domain Schematic Example.
7.2
MONITORING A SIGNAL WITH A METER
To monitor the voltage across two nodes, for example, use a voltmeter from the library
browser. The library browser automatically opens on PLECS start-up. It also be
accessed by selecting Window/Library Browser from the menu or by Ctrl+L. Drag it
from the library browser onto the schematic by clicking on the component and holding
down the mouse button. Use Ctrl+R to rotate and Ctrl+F to flip the component. Once
positioned onto the schematic, you can rename the meter, if desired. Next, connect the
black terminals to the electrical nodes of the circuit.
FIGURE 7-3:
Library Browser Electrical Meters.
