Microchip Technology PL360G55CB-EK, User Manual

Page: 17 / 46

Figure 3-5. PLC Bands Supported by PL360
G3-PLC
CEN-A
0 100 200 300 400 500
Frequency
(kHz)
G3-
PLC
CEN-B
CENELEC [3...148,5 kHz]
G3-PLC ARIB
ARIB [10...450 kHz]
G3-PLC FCC
FCC [10...490 kHz]
USA
JAPAN
EUROPE
CH3 CH4 CH5 CH6 CH7 CH8
CH3 CH4 CH5 CH6 CH7
PRIME 1.4
CH1 CH2
PRIME 1.3 & 1.4
PRIME 1.4
For a further description of the PL360 device see the corresponding PL360 datasheet .
3.3.2 SAMG55J19
The PL360G55CB-EK board is equipped with a SAMG55J19 device in 64-pin QFN. The SAM G55
devices are general-purpose low-power microcontrollers which offer high performance, processing power
and small package options combined with a rich and flexible peripheral set.
The Microchip's SAM G55 embeds a Cortex-M4 CPU with an FPU (floating point unit). This ensures
maximum throughput. This is very important as it allows minimization of the active power consumption
and getting to sleep faster in order to reduce the overall power consumption. Additionally, the device has
30 DMA channels, which gives extremely high throughput.
The SAMG55J19 operates at a maximum speed of 120 MHz and features 512 Kbytes of Flash and up to
176 Kbytes of SRAM. The peripheral set includes eight flexible communication units comprising of
USARTs, SPIs and I
2
C-bus interfaces (TWIs), two three-channel general-purpose 16-bit timers, two I
2
S
controllers, one-channel pulse density modulation, one 8-channel 12-bit ADC, one Real-Time Timer
(RTT) and one Real-Time Clock (RTC), both located in the ultra-low power backup area.
PL360G55CB-EK
PL360G55CB-EK Board
©
2019 Microchip Technology Inc.
User Guide
DS50002871A-page 17