manualshive.com logo in svg

Microchip Technology PIC24FV16KM204 FAMILY, Datasheet

The Microchip Technology PIC24FV16KM204 FAMILY offers exceptional performance and versatility for various industrial applications. Access its comprehensive Datasheet and user manual for a deeper understanding of this product's capabilities. Easily download these resources for free from manualshive.com, empowering you with all the necessary technical information to maximize your experience with this advanced technology.

Share
Download
background image

PIC24FV16KM204 FAMILY

DS33030A-page 264

Advance Information

 2013 Microchip Technology Inc.

26.11 PICkit 2 Development 

Programmer/Debugger and 
PICkit 2 Debug Express

The PICkit™ 2 Development Programmer/Debugger is
a low-cost development tool with an easy to use inter-
face for programming and debugging Microchip’s Flash
families of microcontrollers. The full featured
Windows

®

 programming interface supports baseline

(PIC10F, PIC12F5xx, PIC16F5xx), midrange
(PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30,
dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit
microcontrollers, and many Microchip Serial EEPROM
products. With Microchip’s powerful MPLAB Integrated
Development Environment (IDE) the PICkit™ 2
enables in-circuit debugging on most PIC

®

 microcon-

trollers. In-Circuit-Debugging runs, halts and single
steps the program while the PIC microcontroller is
embedded in the application. When halted at a break-
point, the file registers can be examined and modified. 
The PICkit 2 Debug Express include the PICkit 2, demo
board and microcontroller, hookup cables and CDROM
with user’s guide, lessons, tutorial, compiler and
MPLAB IDE software.

26.12 MPLAB PM3 Device Programmer

The MPLAB PM3 Device Programmer is a universal,
CE compliant device programmer with programmable
voltage verification at V

DDMIN

 and V

DDMAX

 for

maximum reliability. It features a large LCD display
(128 x 64) for menus and error messages and a modu-
lar, detachable socket assembly to support various
package types. The ICSP™ cable assembly is included
as a standard item. In Stand-Alone mode, the MPLAB
PM3 Device Programmer can read, verify and program
PIC devices without a PC connection. It can also set
code protection in this mode. The MPLAB PM3
connects to the host PC via an RS-232 or USB cable.
The MPLAB PM3 has high-speed communications and
optimized algorithms for quick programming of large
memory devices and incorporates an MMC card for file
storage and data applications.

26.13 Demonstration/Development 

Boards, Evaluation Kits, and 
Starter Kits

A wide variety of demonstration, development and
evaluation boards for various PIC MCUs and dsPIC
DSCs allows quick application development on fully func-
tional systems. Most boards include prototyping areas for
adding custom circuitry and provide application firmware
and source code for examination and modification.
The boards support a variety of features, including LEDs,
temperature sensors, switches, speakers, RS-232
interfaces, LCD displays, potentiometers and additional
EEPROM memory.
The demonstration and development boards can be
used in teaching environments, for prototyping custom
circuits and for learning about various microcontroller
applications.
In addition to the PICDEM™ and dsPICDEM™ demon-
stration/development board series of circuits, Microchip
has a line of evaluation kits and demonstration software
for analog filter design, K

EE

L

OQ

® 

security ICs, CAN,

IrDA

®

, PowerSmart battery management, SEEVAL

®

evaluation system, Sigma-Delta ADC, flow rate
sensing, plus many more.
Also available are starter kits that contain everything
needed to experience the specified device. This usually
includes a single application and debug capability, all
on one board.
Check the Microchip web page (

www.microchip.com

)

for the complete list of demonstration, development
and evaluation kits.

Summary of Contents for PIC24FV16KM204 FAMILY

















































































































































































































































































































































Reviews:

No comments

Related manuals for PIC24FV16KM204 FAMILY

e-BLEACH infinity User Manual preview
infinity
Brand: e-BLEACH Pages: 24
M-system SC100 Series Applications Manual preview
SC100 Series
Brand: M-system Pages: 103
M-system MSP40 Instruction Manual preview
MSP40
Brand: M-system Pages: 18
MAKOT UMS-02 Manual preview
UMS-02
Brand: MAKOT Pages: 6
Xilinx ZC702 Getting Started Manual preview
ZC702
Brand: Xilinx Pages: 52
Yamaha RCX340 Service Information preview
RCX340
Brand: Yamaha Pages: 5
LAUNDRY SOLUTION SX205100A User Manual preview
SX205100A
Brand: LAUNDRY SOLUTION Pages: 14
Eaton Cutler-Hammer S701X25N3BP Instruction Leaflet preview
Cutler-Hammer S701X25N3BP
Brand: Eaton Pages: 4
AMX NetLinx Integrated Controller NI-3100 Installation Manual preview
NetLinx Integrated Controller NI-3100
Brand: AMX Pages: 2
Invacare MK5 NX w/ACC Service Manual preview
MK5 NX w/ACC
Brand: Invacare Pages: 44
Savant SmartControl RS232 Quick Reference Manual preview
SmartControl RS232
Brand: Savant Pages: 2
Danfoss OBC 80 Series Manual preview
OBC 80 Series
Brand: Danfoss Pages: 16
Ibiza LC192DMX-MINI User Manual preview
LC192DMX-MINI
Brand: Ibiza Pages: 37
CS Technologies ACE-CONVERTER Installation Manual preview
ACE-CONVERTER
Brand: CS Technologies Pages: 4
Parker Porter MPC Series Installation, Programming, & User Manual preview
Porter MPC Series
Brand: Parker Pages: 30
PPA Citrox CX-4512 Instruction Manual preview
Citrox CX-4512
Brand: PPA Pages: 2
YASKAWA U1000 iQpump Drive Technical Manual preview
U1000 iQpump Drive
Brand: YASKAWA Pages: 706
Sinclair SWC-04 User Manual preview
SWC-04
Brand: Sinclair Pages: 36

Brands by name

Popular brands

Load more brands