3.
PoE Midspan Unit Installation
The following sections describe the procedure for installing the midspan unit.
Note
: Do not use a cross-over cable between the PoE midspan output port and load device.
Warnings
:
1.
When connecting the DC input terminals, take extra care to ensure that the
+ve
and
–ve
terminals are
connected with the correct polarity.
2.
Ensure the DC power is within the allowed range.
3.
Earth ground screw must be connected to earth ground in all types of installations.
3.1
Parts List
The following table lists the parts included in the kit.
Quantity
Component
1
60W midspan, outdoor model
1
DC female connector
1
Quick installation guide
3.2
Additional Parts
The following table lists the additional parts recommended for midspan installation.
Quantity
Part
1
Screwdriver
1
Wire stripper
1
Solid Wrench No. 27 or Adjustable Wrench
PD-9501-10GCO/DC
PoE Midspan Unit Installation
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003347A-page 7