Page 1: ...munications port is available Connect the cable from the PC COM port to the corresponding RS 232 connector on the back of the MPLAB PM3 Programmer 2 Make sure the power switch on the MPLAB PM3 is in t...
Page 2: ...uitry to isolate RB6 PGC RB7 PGD and RBS PGM on the application circuit as this is application dependent Voo Typical circuits use several hundred microfarads of capacitance on Voo to help damp noise a...
Page 3: ...FERENCE CARD 1 DS30210 DOC 1MPORTANT INFORMATION MICROCHIP INFORMATION 1 DS30030 DOC WARRANIY REGISTRATION CARD 1 DS51281 DOC MPLAB IDE 6 xx QUICK START 1 DS51123 SOFTWARE MPLAB CDROM 11 00181 ASSY PM...
