Microchip Technology MPLAB ICE, User Manual

Page: 90 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 90

2001 Microchip Technology Inc.
4.9.3 Opening/Closing a Project
To open a previously created project, select Project>Open Project. Then
select the project file (*.PJT).
Opening a project will perform the following:
• Close the currently open project, if any
• Set the development mode
• Set the processor status
• Open and restore all windows to their saved states
• Download the contents of the hex file to emulation memory
• Reset the processor
To close a project, select Project>Close Project. You will be asked if you want
to save the project before it closes.
Some of the information that is retained with a project is:
• Development mode and processor
• Clock source and frequency
• Source files associated with the project
• Name of the final PICmicro executable file
• Open windows and their sizes and positions
• Named break settings
• Configuration bit settings