RADIUS,
RADIUS - View – RADIUS Status
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
65
10.4
RADIUS - View – RADIUS Status
This Page provides an overview of the status of the RADIUS servers that were configured. Pressing on
the RADIUS Server index number will show detailed statistics for this specific RADIUS Server.
•
#
- Press the index number (1-5) for a detailed RADIUS status statistics report.
•
IP Address
- The IP address of the RADIUS Server that was configured.
•
Authentication Port
- The RADIUS Server UDP port number used for authentication.
•
Authentication Status
- The current status of the RADIUS server. This field takes one of the
following values:
o
Disabled
-
RADIUS server is disabled.
o
Not Ready
-
RADIUS server is enabled, but IP communication is not yet up and running.
o
Ready
-
RADIUS server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
o
Dead (X seconds left)
-
RADIUS-Server fails to reply to authentication requests (timeout) and
was placed in Dead state for Dead-time minutes. This should speed up future remote user
access by skipping on
timeout x retry
waiting delay (in seconds) before switching to next
(backup) Radius-Server. The Server will be re-enabled after dead-time expires.
NOTE:
Dead state is applicable only when there is more than one RADIUS-server, and dead-time time
value is greater than 0