SNMP
SNMP- Trap Configuration
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
59
Privacy Password
- A string identifying the privacy password phrase. The allowed string length is 8 to
32, and the allowed content is ASCII characters from 33 to 126.
9.3
SNMP- Trap Configuration
Provides a summary of the already configured SNMP Trap Servers, with the option to add/delete
remote SNMP trap Servers.
Figure 9-4: SNMP Trap Configuration
9.3.1
SNMP Trap Server List
Delete
- Check to delete the entry. It will be deleted during the next save.
Name
- Every raw at the table has its own unique name.
Enable
- Offers the option to keep SNMP Trap-Server record inside the table without necessary
sending SNMP Trap to the SNMP Trap Server.
•
Enabled:
Send SNMP Trap to the IP address of the remote SNMP Trap-Server.
•
Disabled:
Keep SNMP Trap-Server record, without sending any traps to it.
Version
- Indicates the type of SNMP trap version should be sent. The following options are
available:
•
SNMPv1
: Send SNMP trap in SNMPv1 format.
•
SNMPv2c
: Send SNMP trap in SNMPv2c format.
•
SNMPv3
: Send SNMP trap in SNMPv3 format.
Destination Address
- IPv4 or IPv6 or hostname (for example: my.server.com) address of remote
SNMP Trap-Server. Valid hostname should be made of alphabet (A-Za-z), digits (0-9), dot (.), dash (-).
Spaces are not allowed.
The first character must be an alpha character, and the first and last characters must not be a dot or a
dash.
Destination port
- Indicates the SNMP trap UDP destination port. The default value should be UDP
port 162. Valid UDP port range is 1~65535.