Introduction
Objectives
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
10
1
INTRODUCTION
The following sections describe the manual objectives, concepts used, conventions used, and
associated documentation.
1.1
Objectives
This User Guide introduces Microsemi’s PDS-408G 802.3BT PoE 90W IPv4, IPv6 Ethernet Switch Web
Management configuration and maintenance interface.
1.2
Abbreviations
IPv4
32-bit long IP address
IPv6
128-bit long IP address
DHCPv4
Dynamic IPv4 Host Configuration Protocol
DHCPv6
Dynamic IPv6 Host Configuration Protocol
PoE
Power over Ethernet
NTP
Network Time Protocol
DES
Data Encryption Standard
AES
Advanced Encryption Standard
MD5
Message Digest algorithm 5
SHA
Secure Hash Algorithm
MDI
Media Dependent Interface
MIB
Management Information Base
PD
Powered Device
SNMP
Simple Network Management Protocol
SSL
Secure Sockets Layer
TFTP
Trivial File Transfer Protocol
SysLog
System Log
SSH
Secure Shell
RADIUS
Remote Authentication Dial In User Service
Terminal Access Controller Access-Control System Plus
IGMP
Internet Group Management Protocol
Table 1-1: List of Abbreviations
1.3
Front panel – Quick Overview
Figure 1-1: Unit front panel
1.4
Reset Button
•
Press button for less than 2 seconds and release:
Does nothing.
•
Press button for 2-10 seconds and release:
Reset switch by software (no configuration
change).
•
Press button for more than 10 seconds and release: Restore unit to
factory default
.