Installation and Operation
©
2007 Microchip Technology Inc.
DS51673A-page 13
2.4
MCP6XXX AMPLIFIER EVALUATION BOARD 3 OPERATION
Items discussed in this section include:
• Building the Amplifier
• Testing the Amplifier
• Amplifier Modification: Using 8-Pin SOIC Op Amps
2.4.1
Building the Amplifier
The accessory bag that comes with this kit makes it quick and easy to evaluate the
amplifier described below, which was designed in the Mindi™ Amplifier Designer.
This amplifier is described as follows:
• Difference Amplifier (Single Supply Configuration)
• Power Supply Voltage is 5.0V
• Differential Mode Input Signal
• Desired Closed Loop Gain is 1 V/V
• Load Capacitance is 56 pF
FIGURE 2-9:
Difference Amplifier Designed In the Mindi™ Amplifier Designer.
Summary of Contents for MCP6 series
Page 1: ...2007 Microchip Technology Inc DS51673A MCP6XXX Amplifier Evaluation Board 3 User s Guide...
Page 29: ...Schematic and Layouts 2007 Microchip Technology Inc DS51673A page 25 A 3 BOARD TOP SILK LAYER...
Page 31: ...Schematic and Layouts 2007 Microchip Technology Inc DS51673A page 27 A 5 BOARD BOTTOM LAYER...
Page 35: ...Bill of Materials BOM 2007 Microchip Technology Inc DS51673A page 31 NOTES...
