Microchip Technology MCP3911, User Manual

Page: 25 / 29

MCP3911 ADC EVALUATION BOARD
FOR 16-BIT MCUs USER’S GUIDE

2012 Microchip Technology Inc. DS52033A-page 25
Appendix B. Bill of Materials (BOM)
TABLE B-1: BILL OF MATERIALS (BOM)
Qty Reference Description Manufacturer Part Number
6 Jumper Conn. Jumper Shorting .100" Gold Sullins Connector
Solutions SPC02SVGN-RC
1 L1 Ferrite 300 mA 150 Ohm 1806 SMD Laird Technologies LI1806C151R-10
1 LCD1 LCD 16 X 2 Chip on glass reflective Fema Electronics CG1626-SGR1
1 LCD2 DO NOT POPULATE - LCD 16 X 2 FTN
Reflective No. Blwt. Cog 3V
Tianma Microelec-
tronics TM162JCAWG1
2 LD1, LD2 LED Smartled Green 570 nm 0603 OSRAM Opto
Semiconductors LG L29K-G2J1-24-Z
1 LD3 LED Smartled 630 nm Red 0603 SMD OSRAM Opto
Semiconductors LS L29K-G1J2-1-0-2-R18-Z
2 LD4, LD5 LED SS 5 mm 640 nm Red Diff. Kingbright Corp. WP7113LSRD
1 LD6 LED 2 X 1.2 mm Red/Green Wtr. Clr. SMD Kingbright Corp. APHBM2012SURKCGKC
1 Q1 MOSFET P-Ch G-S 12V SC-70-3 Vishay Siliconix SI1307EDL-T1-GE3
10 R1, R2, R23,
R24, R40, R41,
R43, R52, R31,
R34 DO NOT POPULATE - Res. 0603 SMD
2 R20, R42 Res. 1M Ohm 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF1004V
2 R27, R32 Res. 0 Ohm 1/10W 0603 SMD Panasonic - ECG ERJ-3GEY0R00V
2 R28, R62 Res. 10k Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ103V
25 R3, R4, R11,
R13, R15, R19,
R21, R22, R25,
R26, R29, R30,
R35, R37, R45,
R46, R47, R49,
R50, R51, R56,
R57, R59, R60,
R63 Res. 1k Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ102V
5 R33, R36, R44,
R48, R58 Res. 4.7k Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ472V
2 R38, R39 Res. 2.2k Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ222V
1 R53 Res. 56 Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ560V Digi-Key
P56GCT-ND
1 R54 Res. 510 Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ511V Digi-Key
P510GCT-ND
9 R5, R6, R8,
R10, R12, R14,
R16, R17, R18 Res. 100 Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ101V
4 R7, R9, R31,
R34 Res. 10 Ohm 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ100V
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM
used in manufacturing uses all RoHS-compliant components.