Installation and Operation
2015 Microchip Technology Inc.
DS50002447A-page 23
FIGURE 2-9:
Data to Send to the HV583
Input Registers.
The code flow is specified in the
main.c
file (see
) located under the Source
Files folder.
NOTICE
By default, the code provided sends data into the DnB Input registers of the HV583.
WARNING
The PIC32 Starter Kit (DM320001) cannot be used to read data back from the
HV583 Evaluation Board because of the difference in the logic voltage level:
3.3V (PIC32) vs. 5.0V (V
DD
). If used, this will cause the ESD protection diodes
in the PIC32 board to forward bias and possibly damage the board.
