MIC33M656 Evaluation Board User’s Guide
DS50002914A-page 20
2019 Microchip Technology Inc.
9. Once the installation is complete, leave the “Launch the program”
box checked
to automatically start the I
2
C Monitor GUI or deselect this check box to start the
GUI at a later stage.
Click
Finish
to end the installation.
To start the GUI at a later stage, either click the desktop icon or browse to
Windows Start>All Programs>Microchip>I2C Monitor
.
FIGURE 3-4:
The Installation Complete Window.
3.3
I
2
C MONITOR GRAPHICAL USER INTERFACE UNINSTALL
In order to install a new version of the I
2
C Monitor Graphical User Interface, any
previous version or corrupted version should be removed from the computer.
To uninstall, go to
Windows Start>Control Panel>Uninstall a program>I2CMonitor
. The
I
2
C Monitor GUI will automatically close once the uninstallation process is complete.
FIGURE 3-5:
Uninstalling the I
2
C Monitor Graphical User Interface.