6.
Customizing Module Parameters
6.1
Config Tool Setup
The IS208x_Config_GUI_Tool Config Tool setup is a configuration tool that allows the user to change the BM83
module parameters such as device name, Bluetooth Low Energy connection settings, LED configuration, enable/
disable Pairing mode and other functions.
Note:
For this demonstration, Config Tool version
IS208x_Config_GUI_Tool v1.0.11
is used. Refer to the
. For additional details on the Config Tool, refer to
IS208x Config
GUI Tool User’s Guide
.
To configure the GUI parameters, perform the following steps:
1. Open the Config Tool and click
OK
to configure the parameters.
Figure 6-1. Config Tool - Welcome Window
2. In the Config Tool, click
Load
.
Figure 6-2. Config Tool
BM83 EVB
Customizing Module Parameters
©
2019 Microchip Technology Inc.
User Guide
DS50002902A-page 28
