Figure 5-14. Creating Role
5.1.4
Configure AWS CLI
In the following section, use ZTUser account to configure the cloud settings and provision the board to
AWS User account. While performing the AWS account provision, the user needs to configure AWS
Command Line Interface (CLI) before running Python scripts.
The following are the steps to configure AWS CLI with ZTUser credentials:
1.
Download and install the AWS CLI tool from
.
2.
Run the following command:
aws configure --profile ZTUser
in the Command Prompt.
3.
Enter the Access Key ID and Secret Access Key of ZTUser account when prompted. Copy and
paste the credentials to avoid any typing mistakes.
4.
Observe the following results on the Command Prompt window:
>aws configure --profile ZTUser
AWS Access Key ID [None]: ACCESSKEYID
AWS Secret Access Key [None]: SECRETACCESSKEY
Default region name [None]: us-east-1 ( <-- Enter the region that you selected )
Default output format [None]:
5.2
AWS IoT Just-in-Time Registration Setup
Use the ZTUser account to configure AWS IoT settings.
ATWINC15x0 Smart Device Kit
AWS Setup
©
2019 Microchip Technology Inc.
User Guide
DS50002885A-page 34
