Microchip Technology ATtiny1627 Curiosity Nano Hardware User'S Manual Download

Page: 1 / 39

ATtiny1627

ATtiny1627 Curiosity Nano Hardware User Guide

Preface

The ATtiny1627 Curiosity Nano Evaluation Kit is a hardware platform to evaluate microcontrollers in the tinyAVR

series. This board has the ATtiny1627 microcontroller (MCU) mounted.

Supported by Atmel Studio and Microchip MPLAB

X Integrated Development Environments (IDEs), the board

provides easy access to the features of the ATtiny1627 to explore how to integrate the device into a custom design.

The Curiosity Nano series of evaluation boards include an on-board debugger. No external tools are necessary to
program and debug the ATtiny1627.

•

- Software to discover, configure, develop, program, and debug Microchip

microcontrollers.

•

ATtiny1627 website

- Find documentation, sample, and purchase microcontrollers.

•

ATtiny1627 Curiosity Nano website

- Kit information, latest user guide and design documentation.

•

Code examples on GitHub

- Get started with code examples.

2020 Microchip Technology Inc.

User Guide

DS40002199A-page 1

Summary of Contents for ATtiny1627 Curiosity Nano








































Search results

Summary of Contents for ATtiny1627 Curiosity Nano

Reviews:

Related manuals for ATtiny1627 Curiosity Nano

Brands by name

Popular brands

Microchip Technology ATtiny1627 Curiosity Nano, Hardware User'S Manual

Search results

Summary of Contents for ATtiny1627 Curiosity Nano

Reviews:

Related manuals for ATtiny1627 Curiosity Nano

Brands by name

Popular brands