8.
Regulatory Approval
The ATSAMA5D27-WLSOM1 is the implementation of the ATWILC3000-MR110UA module in a particular host, in this
case the PCB of the ATSAMA5D27-WLSOM1.
The ATWILC3000-MR110UA module has received regulatory approval for the following countries:
• United States/FCC ID: 2ADHKWILC3000U
• Canada/ISED:
– IC: 20266-WILC3000UA
– HVIN: ATWILC3000-MR110UA
– PMN: ATWILC3000-MR110UA
• Europe/CE
8.1
United States
ATWILC3000-MR110UA module has received Federal Communications Commission (FCC) CFR47
Telecommunications, Part 15 Subpart C “Intentional Radiators” single-modular approval in accordance with Part
15.212 Modular Transmitter approval. Single-modular transmitter approval is defined as a complete RF transmission
sub-assembly, designed to be incorporated into another device, that must demonstrate compliance with FCC rules
and policies independent of any host. A transmitter with a modular grant can be installed in different end-use
products (referred to as a host, host product, or host device) by the grantee or other equipment manufacturer, then
the host product may not require additional testing or equipment authorization for the transmitter function provided by
that specific module or limited module device.
The user must comply with all of the instructions provided by the Grantee, which indicate installation and/or operating
conditions necessary for compliance.
A host product itself is required to comply with all other applicable FCC equipment authorization regulations,
requirements, and equipment functions that are not associated with the transmitter module portion. For example,
compliance must be demonstrated: to regulations for other transmitter components within a host product; to
requirements for unintentional radiators (Part 15 Subpart B), such as digital devices, computer peripherals, radio
receivers, etc.; and to additional authorization requirements for the non-transmitter functions on the transmitter
module (i.e., Suppliers Declaration of Conformity (SDoC) or certification) as appropriate (e.g., Bluetooth and Wi-Fi
transmitter modules may also contain digital logic functions).
8.1.1
Labeling and User Information Requirements
The ATWILC3000-MR110UA module has been labeled with its own FCC ID number, and if the FCC ID is not visible
when the module is installed inside another device, then the outside of the finished product into which the module is
installed must display a label referring to the enclosed module. This exterior label should use the following wording:
Contains Transmitter Module FCC ID: 2ADHKWILC3000U
or
Contains FCC ID: 2ADHKWILC3000U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
SAMA5D27 Wireless SOM1
Regulatory Approval
©
2021 Microchip Technology Inc.
and its subsidiaries
Complete Datasheet
DS60001590D-page 59
