4.
Installation and Operation
4.1
System and Configuration Requirements
The ATSAMA5D27-WLSOM1-EK1 requires the following:
• Personal Computer
• USB cable (included in the kit box)
• Wireless antenna (included in the kit box)
4.2
How to Mount the Wireless Antenna on the Kit
4.2.1
Place the Panel Sleeve
By default, two panel sleeves are included in the kit, one round and one hexagonal. Only the hexagonal one can be
used with the kit.
Place the hexagonal sleeve as shown below. Ensure that the slot of the sleeve is correctly oriented.
Figure 4-1. Place the sleeve
4.2.1.1
Place the Antenna Cable
Place the antenna cable into the sleeve as shown below.
Figure 4-2. Place the cable into the sleeve
Near the module placed in the center of the board, pass the antenna cable through the small hole as shown below.
ATSAMA5D27-WLSOM1-EK1
Installation and Operation
©
2019 Microchip Technology Inc.
User Guide
DS50002931A-page 44
