Figure 3-25. RGB LED Device Location
The table below describes the pin assignment of RGB LED.
Table 3-9. RGB LED Pin Assignment
Signal
PIO
Function
RED_LED
PA6
GPIO/TIOA5
GREEN_LED
PA7
GPIO/TIOB5
BLUE_LED
PA8
GPIO
3.6
Debugging Capabilities
The ATSAMA5D27-WLSOM1-EK1 includes two main debugging interfaces to provide debug-level access to the
SAMA5D2:
• One JTAG interface connected from the MPU using connector J25.
• One UART interface connected from the MPU using connector J26.
3.6.1
Debug JTAG
This section describes the signals and connectors related to the JTAG interface.
ATSAMA5D27-WLSOM1-EK1
Baseboard Components
©
2019 Microchip Technology Inc.
User Guide
DS50002931A-page 28
